Professional KTV sound effects device recommendation

　　KTV sound effects device is an audio peripheral equipment that provides various sound field effects. Originally mainly used for the production of sound effects in recording studios and movies, it has now been widely used in live sound reinforcement systems and home KTV sound systems. No matter how high the quality of the effector is, if you can't master its adjustment skills, you will not only not be able to obtain the desired sound effect, but also destroy the sound quality of the entire system.

　　The basic effect types of the effector are sound field effect, special effect and sound source effect. Digital effects generally store dozens or hundreds of effect types, and some effects have parametric equalization, noise gate, excitation, and compression/limiting functions. Users can choose the corresponding effect type according to their own needs.

　　Today, I will introduce a KTV sound effect device, also called a karaoke pre-stage effect device, which is often referred to as: pre- and post-stage when used in conjunction with professional power amplifiers.

　　KTV sound effect device recommendation: GAEpro DDS-216

　　USB or RS232 terminal product control, using RS485 mode, Z can realize remote real-time control of up to 256 devices, equipped with PC software operation, there are 32 user presets; gain, noise gate, 8 parameters although equalization, mute, delay 5 processing units are the input processing part; 7 processing units such as mute, compressor/limiter, phase, delay, frequency division, 5 parametric equalization, gain, etc. are the output processing part; 32-bit DSP chip processing, S -AAD/DA conversion, 24-bit. 48KHZ sampling rate; ratio, start-up time, compressor/limiter threshold, recovery time are continuously adjustable; recovery time, start-up time and noise gate threshold are continuously adjustable ; Crossover, low-field filter. High-field type can be selected: Bessel. LinkwitZ-Riley. Butterworth, slope can be selected from -6dB/0ct to -48 dB/Oct. Although the frequency point of parameter equalization, gain and bandwidth are adjustable, the type can be selected: L-SHELVE. H-SHELVE, PEAK; all outputs and inputs can be freely assigned by matrix; the delay module has a delay time of up to 682ms , the step is 0.02/ms; the parameter settings between channels can be copied freely, and there is a built-in test signal generator:

https://www.primacabinets.com/products/

Read recommendations:

PSM18 POINT SOURCE MONITOR Speaker bar Factory

I3 Small bar sound Vendor

EVO 7TL-215 Sound bar Factory

Debugging points of wireless microphones in KTV audio equipment

How to install and debug villa private theater audio