Project Details

A2 is a compact passive 3-line array speaker. It includes two 10 " low frequency drivers, a 6.5" tapered driver loaded with multipath waveguides and two 0.65 " exit compression drivers loaded with dual exit waveguides. Two 10 " low frequency drivers are equipped with narrow Q bandpass horns for additional sensitivity, before actually loaded corresponds to two 12 "drive, the SPL exceeds 150 - 400 Hz by adjusting the combination of the volume, a low frequency response extends to 65. Hz .    

The core of A2, just like its predecessor A1, is a 6.5 " neodymium magnetic cone driver composed of M6 mid-frequency drivers loaded with international patented multipath waveguides. This technology not only improves the sensitivity by 10 decibels, but the M6 channel also eliminates harmonics, so When the maximum sound pressure level exceeds 10 decibels, the distortion level is lower than that of ordinary direct radiators. M6 also has a wide horizontal beam width and a high cut-off frequency of 4 kHz, so a small diaphragm light compression driver can be used to improve sensitivity and detail. Aura Audio D80DSP or D100DSP-powered controller can drive up to twelve (4 groups ×  3) A2s . 

application:

l   Large and medium-sized mobile performances

l   High-quality bar

l   Large and medium-sized fixed installation

Specification:

l   Frequency response ( +-3 dB): 65 – 22000 Hz  

l   Horizontal coverage ( -6 dB): 90 degrees

l   Vertical coverage ( -6 dB): 10 degrees

l   Maximum peak sound pressure: 137 dB (free space)

l   Sensitivity, 1w/1m : 107 dB (free space)

l   Crossover point: 400 Hz and 3.5 kHz 3-way passive  

l   Power handling: 600 W rms, 2400 W p ea k

l   Recommended high voltage filter: 65 – 80  Hz , 12 dB/oct   

Unit composition:

l   Woofer: ( 2) ×  10 " cone driver, loaded with band-pass speaker

l   Midrange unit: ( 1) ×  6.5 " neodymium magnetic cone driver, speaker loading

l   Tweeter: ( 2) ×  0.65 " outlet compression driver, three-outlet waveguide

Cabinet:

l   Cabinet : birch plywood, black textured paint finish

l   Grille: cold rolled steel grille, black textured paint surface

l   Connector: ( 2) ×  NL4, +/-1: input/output, +/-2: connection

l   Dimensions: 700 mm ×  310 mm ×  460 mm     

l   Weight: 33 kg