Professional Audio Finland AURA AUDIO China Entertainment General Agent Mateng Audio Company

　　There are various high-tech equipment in the 21st century. When it comes to audio, I think everyone will not feel unfamiliar. This is a very common equipment, widely used in some large entertainment venues, etc., so like Finland What are the characteristics and advantages of such a good audio system as AURA AUDIO? Regarding this issue, I will give you a simple analysis today. Let’s share it together.

　　A3

　　A3 is a large three-way line array speaker. It consists of two 15" low-frequency drivers, two 6.5" tapered drivers loaded with multipath waveguides, and four 0.65" exit compression drivers loaded with dual-port waveguides.

　　The core of A3, just like its predecessor, A1, is a 6.5" neodymium magnetic cone driver composed of M6 mid-frequency drivers loaded with international patented multipath waveguides. This technology not only improves the sensitivity by 10 decibels, but the M6 channel also eliminates harmonics, so The distortion level when the maximum sound pressure level exceeds 10 decibels is lower than that of ordinary direct radiators. M6 also has a wide horizontal beam width and a high cut-off frequency of 4kHz, so a small diaphragm light compression driver can be used to improve sensitivity and detail. Aura Audio The combination of D80DSP or D100DSP power supply controller and D80 or D100 non-processing amplifier can drive up to twelve A3s.

　　application:

　　Large-scale mobile performance

　　High-quality large bar

　　Large and medium-sized fixed installation

　　Specification:

　　Frequency response (+-3 dB): 60 – 22000 Hz

　　Horizontal coverage (-6 dB): 90 degrees

　　Vertical coverage (-6 dB): 7 degrees

　　Maximum peak sound pressure: 144 dB (free space)

　　Sensitivity LF, 1w/1m: 99 dB (free space)

　　Sensitivity HF, 1w/1m: 113 dB (free space)

　　Crossover point: 400Hz active, 3.5kHz passive

　　Power handling LF: 1000 W rms, 4000 W peak

　　Power handling HF: 300 W rms, 1200 W peak

　　Recommended high voltage filter: 45-60Hz, 12dB/oct

　　Unit composition:

　　Woofer: (2) × 15" cone screwdriver

　　midrange unit: (2) × 6.5" neodymium magnetic cone driver, speaker loading

　　tweeter: (4) × 0.65” outlet compression driver, dual outlet waveguide

　　Cabinet:

　　Cabinet: birch plywood, black textured paint finish

　　grille: cold rolled steel grille, black textured paint surface

　　Connector: (2)×NL4, +/-1: LF, +/-2: HF

　　Size: 1250 mm × 420 mm × 555 mm

　　Weight: 57 kg

　　Shenzhen Mateng Audio Technology Co., Ltd. is the general entertainment agent of Finland AURA AUDIO. It is a professional engineering company engaged in audio design, construction and debugging. The company is located in Longgang, Shenzhen. It has a complete management system and integrated sales enterprise.

Read recommendations:

DS 210Sound bar Vendor

XD18C Big sound bar Merchant

Resolution 4E Bar speakers Factory

What are the differences between professional audio and civilian audio?Bar hall sound Vendor

Wuxi HYPER OG bar audio recommendation--Mateng Audio