Resolution 4 T Touring is a three-way low-mid - high speaker, which is perfectly suitable for performances in medium-sized venues. It is most commonly used in occasions where the horizontal diffusion angle of the speaker groups on both sides is 80° to 90° .
Resolution 4T Touring is a three-way low-mid-high speaker, which is perfectly suitable for performances in medium-sized venues. It is most commonly used in occasions where the horizontal diffusion angle of the speaker groups on both sides is 80° to 90°. It can also be used as a delay speaker in the R5T system or close-up sound in large-scale performances. The size of R4T is the same as R5T and R18, so it can be installed together with R5T suspension system to make the system easier to install and adjust the angle. The revolutionary suspension system is integrated and hidden in each speaker separately. , There will be no loss of hinges, connectors, bolts or tools, etc. In addition, this system can also be safely set up as a stack speaker system placed on the stage floor. R4T, a powerful speaker, is designed for four-way crossover system, three-way low-mid-high part, and it can be used with low-frequency speakers such as F218, F121, and F221.
If you don't need a suspension system, you can choose the simple version R4E for fixed installation.
characteristic:
• Full horn load type, high-efficiency speaker
• Funktion-One design neodymium magnet drive
•Integrated built-in box hoisting system
• Built-in a piece of speaker cable, hidden in a small hole behind the speaker when not in use
• Same size as Resolution 5 and 18
•A wheel version is available for purchase
• There are gray or black cloth mesh options
driver | Frequency band | Sensitivity (1w@1m) | Recommended power amplifier (Rms)* | Nominal impedance |
12" | 114-445Hz | 105dB | 300W | 8Ω |
8" | 445-5k77Hz | 108dB | 200W | 16Ω |
1" | 5k55Hz | 109dB | 50W | 16Ω |
*AES standard
Frequency response ±3dB: | 114Hz-18kHz |
weight: | 46kg (101lbs) |
Nominal diffusion angle: | 50° horizontal × 25° vertical |
interface: | EP6 female socket and an EP6 male plug audio lead |

Popular recommendation
F55 Bar speaker company
2021-07-16PSM 12 POINT SOURCE MONITOR Speaker bar company
2021-07-16F221 Marten Audio Merchant
2021-07-14F81 Bar speaker company
2021-07-16Resolution 5S skeletal Concert sound Vendor
2021-07-16F315 Mini bar sound Vendor
2021-07-14F88 Car stereo Merchant
2021-07-16DS 210Sound bar Vendor
2021-07-17Evolution 7E Sound bar Merchant
2021-07-16Resolution 4T Touring Bar use sound Vendor
2021-07-16Infrabass 218Sound for bars Vendor
2021-07-14Resolution 1.5TT Marten Audio company
2021-07-16How to distinguish between monitor speakers and ordinary speakers.Shenzhen conference room audio
2022-06-24KTV sound engineering design equipment configuration points.Gymnasium audio
2022-02-22The installation of conference audio system is not affected by the on-site environment
2022-12-29Specification for Acoustic Characteristics of Sports Venues.Bar bar sound Processor
2022-05-27What factors need to be considered when purchasing conference audio equipment?
2022-08-22Inner Mongolia Hohhot Bar ID-X CLUB Audio is provided by Ma Teng Audio
2022-09-13How does the power amplifier amplify the audio signal?
2022-03-30Which hole does the speaker plug into the computer? How to connect the computer to the audio
2022-09-01Zunyi FIRST ROOM bar audio system is provided by Maarten Audio
2022-09-08Dingyuan's most fun bar TAICHI PARTY special audio---Mateng Audio
2022-05-06How to Design and Choose the Sound Reinforcement System of Conference Room
2021-09-06Solutions to common problems of stage listening system
2023-02-01