source:Industry News release time:2022-09-19 Hits: Popular:Brand bar audio wholesale

It is still during the coronavirus epidemic, many areas have resumed work, and many friends must use microphones for work. However, due to the transmission characteristics of the coronavirus, when we use microphones, especially when recording human voices at close range We must be especially careful to prevent the virus from spreading from the device to the crowd, so how can we reduce this risk, look down:
1. Use a disposable microphone sponge cover
In addition to the epidemic, we all recommend the use of disposable microphone sponge covers. On the one hand, it can avoid the spread of viruses through saliva, and on the other hand, it is convenient for cleaning the microphone after use. It should be used during the current epidemic. reduce the risk of transmission;
2. Use household fresh-keeping bags
On the basis of using the microphone sponge cover, put a thin layer of fresh-keeping bag. The fresh-keeping bag can prevent saliva from adhering to the microphone to a great extent. The fresh-keeping bag is as thin as possible and cannot be damaged, which can protect the sound quality to a greater extent It can also protect yourself if it is lowered, remember to have one bag per person and replace it in time;
3. Clean the windshield after use
Windshields made of plastic and other solid materials can be cleaned with alcohol or disinfectant. But never use any liquid cleaners or chemicals on foam or fur-like windshields, as this can cause permanent damage.
Fourth, clean the microphone
Clean the microphone housing with a cloth moistened with a suitable cleaner. However, do not immerse the cloth in alcohol or disinfectant. To avoid damage, extreme care must be taken to ensure that no liquid enters the inside of the microphone or (especially) does not reach the diaphragm inside the mic enclosure. The surest way to make sure your microphone is virus-free is to leave it out long enough, that is, a few days after use. Viruses die faster at higher temperatures. Microphones are heated to 60°C during the manufacturing process, so we know that temperatures of 50°-60°C will not impair the functionality of the microphone.
The above tips can be referred to by friends, and protect yourself during the resumption of work.
Popular recommendation
F55 Bar speaker company
2021-07-16DS 210Sound bar Vendor
2021-07-17F81 Bar speaker company
2021-07-16F215 MK2 ktv bar sound Factory
2021-07-14MST 10Sound bar sales
2021-07-17C15 Bar sound bar wholesale
2021-07-26F1 Mini bar sound Factory
2021-07-26Infrabass 218Sound for bars Vendor
2021-07-14MB210 Low Profile Bar audio set Merchant
2021-07-14F118 MK2 Brand bar audio sales
2021-07-14Resolution 4S Skeletal Bar use audio Vendor
2021-07-16I3 Small bar sound Vendor
2021-07-26Hohhot ID-X special audio equipment for party bar---Mateng Audio
2022-05-27Line array speakerBuying advice.Big sound bar Vendor
2021-11-02Zunyi FIRST ROOM Internet celebrity bar special audio equipment is provided by Ma Teng Audio
2022-04-06How to adjust the stage sound in the performance?
2021-09-09Common Human Operation Failures in Professional Audio.Recommended speakers for bars
2022-06-10The difference between entertainment professional audio amplifier and home amplifier!High-end bar au
2021-11-05The audio industry may be expected to develop with the smart home!
2022-09-07Matters needing attention in the construction of sound reinforcement system
2022-08-15Dingyuan TAICHI PARTY bar special audio---Mateng Audio
2022-11-10What are the new markets for professional audio in recent years?
2022-01-11Preparation before system debugging of professional audio manufacturer!Hunan Bar Audio Vendor
2021-11-04Entertainment audio is connected with the sound reinforcement of audio amplifier.Gymnasium audio pri
2021-12-28