How to install a conference sound system will be better?Banquet hall audio Vendor

　　In general, the area of the conference room is larger than that of the room at home, and the structural design is different. Therefore, the equipment and installations of the conference room sound system and the home sound system will be different. Therefore, if you want to make the conference sound system The use effect is better, and more effort is required when installing it. Let's learn how to install the sound effect of the conference audio system better.

　　1. Use the right rack

　　In order to make the sound transmission effect of the conference audio system better, it is very necessary to choose a suitable rack for it to maintain the equipment from sensation, and pay attention to placing the power amplifier on the top of the rack. The maximum heat is placed on the top layer, which is more conducive to heat dissipation, so that the equipment can maintain outstanding performance. In addition, other equipment should ensure that each unit is placed on a separate layer to maintain excellent heat dissipation.

　　2. Make the frame shockproof

　　If the shock resistance is poor, then there will be a sensation when a louder sound is made, and the sound playback will be affected. Therefore, if the sound effect of a first-class conference audio system is better, it is necessary to be shockproof. For example, fixing the rack, adding special metal to the rack according to the load-bearing capacity of the rack, and filling the hollow structure of the rack with sand to increase the weight to prevent abnormal noise caused by sensation when the volume is loud.

　　3. The height and orientation of the device should be appropriate

　　If you want to install the conference sound system on the wall, the wall must be stable, and the position of the tweeter should be basically the same as the position of our ears when listening. In addition, in the conference room, the orientation of the speaker device should not be too close to the wall, because too close to the wall will make the low sound insufficient, and do not put the speaker in an angled place, so as not to make the low sound muddy and affect the sound of the conference room. The sound effect of the system.

　　The correct installation of all the equipment in the conference audio system can not only allow the equipment to be effectively maintained, but also make the sound transmission better. Therefore, when installing the audio equipment for the conference, the staff should know which sound system to find in the conference room. In addition, you should also understand some correct installation methods and use maintenance methods.

Read recommendations:

Resolution 4S Skeletal Bar use audio Vendor

F1 Mini bar sound Factory

XQ42 Bar speaker wholesaler

Lanzhou T61 CLUB special audio equipment is provided by Ma Teng Audio

Introduction to the principle of professional audio waterproofing