How to choose audio equipment according to the room environment

　　Audio used to be a high-end plaything out of reach, but with the improvement of people's consumption level, audio has entered the "ordinary people's home", and the choice of home audio is also dazzling, so how to choose a suitable one according to the room environment What about the audio equipment?

　　First of all, we must first confirm the size of our own room and the placement direction of the speakers. These are two very important points. We choose the size and caliber of the speakers based on our own room size. The second is to choose the visual effects that the speakers can bring. But it doesn't affect your viewing experience.

　　If the room is too small, don't consider using large stand-alone speakers or in-wall speakers. An excellent wall-mounted speaker coupled with a subwoofer can achieve good sound density and envelopment in a small room. It is also shocking; if it is a large room, if conditions permit, in-wall speakers can be considered, which can ensure the sound quality while focusing more on the visual focus, which is a good choice for movie viewing. Finally, independent speakers are more suitable for placing in larger rooms, or for audiophiles who like both cinema and music, because most people still like the combination of sound and vision, that is, "hearing and seeing". Depending on the characteristics and installation methods of speakers, it is not difficult to match speakers that suit your environment.

　　Room requirements and channel reservations

　　As far as design is concerned, a good home theater environment has certain requirements on the aspect ratio of the room. Generally speaking, we use the narrow side of the room as the screen position, and the long side as the design for sound absorption or reflection. In terms of proportions, a rectangle should be preferred. If the user chooses an in-wall speaker, special attention should be paid to the wiring method in terms of construction requirements. It is possible to route on the ground, along the wall or on the ceiling. Be prepared to reserve. Because the dark lines in the design are basically formed at one time, it will be very cumbersome to add them later, and even destroy the existing decorations and reinstall them. Therefore, when wiring, you must consider whether you need to add more in the future. sound.

　　In the use of home theater speakers, we can generally be divided into three categories: wall-mounted speakers, independent speakers and in-wall speakers.

　　First, let's take a look at the main features and installation methods of various speakers.

　　(1), wall-mounted speakers

　　Wall-mounted speakers: In order to match the slim shape of flat-screen TVs, the shape of typical wall-mounted speakers or flat-panel speakers is usually very slender, and most of them pay attention to the coordination with the screen in appearance, and strive to be fashionable. This is different from the satellite speakers we usually come into contact with. Satellite speakers also belong to the list of wall-mounted speakers, which are slightly larger and thicker. No matter what kind of wall-mounted speakers are currently facing a problem, that is, the volume is slightly small, the unit used is small, and it is difficult to achieve very high-quality low-frequency performance without using a subwoofer. Therefore, wall-mounted speakers are It is recommended to use with a subwoofer. In terms of design, the wall-mounted speakers have various shapes, are more beautiful and fashionable, occupy a small area, and are easy to install. They are also favored by users in some small rooms. If your room is about 15 square meters, it is more appropriate to use this type of speaker without adopting a concealed design.

　　(2) In-wall speakers

　　In-wall speakers: In-wall speakers have been around for several years. At present, the sound quality of high-quality in-wall speakers has approached that of stand-alone speakers. The advantages of in-wall speakers are obvious, saving space and "wasting" space are equally important. How to say it? "Saving" is a visual saving, that is to say, the whole room looks clean at a glance, and there are no speakers in front of you to block the line of sight. . The "waste" means that more space is needed to install it, because the in-wall speaker needs to use the wall as a "box" or install its matching box, which means that the wall should be "thick" enough during decoration. The audio-visual room will be smaller, but it will be visually "spacious". The biggest feature of this kind of speaker is to save space, and at the same time, the good concealment will not affect the design style of the whole room. In the home theater system, the concealed performance of the in-wall speakers makes the audience's attention more focused on the screen. Therefore, the in-wall speakers are warmly welcomed in developed countries such as Europe and the United States. In terms of subwoofer settings, in-wall speakers can choose in-wall subwoofers or traditional subwoofers, and the effect is satisfactory.

　　(3), independent speakers

　　Stand-alone speakers: Stand-alone speakers can be said to be the best way to sound so far. For enthusiasts, the excellent effects presented by standalone speakers are still the "standard" in all speakers, and standalone speakers also allow users to have A greater degree of freedom to arrange your own audition space, which may be very good in fine-tuning and placement of the sound. But at the same time, the huge volume of independent speakers will also take up more space and interfere with our line of sight, which is also the disadvantage of independent speakers. In terms of sound quality, the independent speakers must also be connected to the subwoofer, because we know that the subwoofer below 40Hz needs to be expressed by the subwoofer, which is difficult for any main channel speaker at present.

Read recommendations:

DS 210Sound bar Vendor

XQ48 Bar sound bar Merchant

MB210 Low Profile Bar audio set Merchant

Performance index of loudspeakers!Bar bar sound Processing

The difference between the sound quality of professional audio and ordinary audio.Sound for bars