Teach you a few tips for tuning operations

　　Many speaker engineers and tuners who are just getting started will find it difficult to operate when faced with a dazzling array of speaker equipment. Now let's talk about the little tricks in the tuning operation.

　　The human ear is more sensitive to timbre, and it can directly determine whether the sound is realistic or not. If the timbre is not handled well, it will not only make the sound monotonous and boring, but also cause serious distortion of the musical instrument or singing. Therefore, the importance of timbre processing cannot be ignored. For male voices, most people's voices are relatively low and lack treble. In order to improve the clarity of singing, the frequency of 3kHz can generally be compensated. For female voices, the treble is too much, and the sound is "sharp". In order to make the sound louder and not too harsh, the 400Hz frequency component can generally be compensated.

　　Teach you a few tips for tuning operations

　　Reverberation usually determines the length of the reverberation, which has a direct impact on the color and clarity of the sound. Under normal circumstances, when the bass is singing, the reverberation time can be shortened to improve the clarity of the sound; if it is a soprano singing, the reverberation time can be appropriately extended to increase the color of the sound. For a singing venue, if the walls around the room are made of wooden materials, the reverberation time should be reduced to avoid blurring the sound; on the contrary, if the walls around the room are made of wooden materials, the reverberation time should be reduced. The time should be reduced to avoid blurring the sound; on the contrary, if the room is hung with sound-absorbing materials such as flannel curtains, the reverberation time should be increased in such a room to prevent the sound from being dry. In addition, the size of the audience and the audience also has a great impact, because the audience's clothing also has a great sound absorption effect. Therefore, speaker engineers and tuners can choose a reverberation time that feels appropriate between 1 and 2 seconds.

Read recommendations:

Dance Stack Overview Car stereo Factory

F218 Mk2 Learning audio Vendor

Resolution 1.5 ktv bar sound Vendor

Pressure Limit Control in Professional Audio System

Chongqing T61 bar special audio--Mateng Audio