Talking about the maintenance of KTV audio equipment system

　　No matter how advanced the KTV audio equipment is, it must be debugged in place to maximize its effectiveness. Maintaining stability, especially the long-term continuous and stable work of the terminal speaker system, is a major event involving the interests and operations of KTV.

　　KTV audio equipment is different from any other audio use occasions, mainly because KTV does not have special personnel to operate the system, so to a certain extent, even a good brand may not always work in a good state. Therefore, it will also lead to the situation that there are no speakers that cannot be burned. Basically, it is believed that the power of the power amplifier is 2-3 times greater than that of the load, which is necessary for a system operated by professionals. However, to configure the power of the KTV system in this way is equivalent to laying a mine. Of course, the waiter can isolate the output of the power amplifier at a constant, but in fact, for those who sing loudly, the setting of this constant cannot satisfy their desire to shout at all.

　　It is recommended that the power of the power amplifier be greater than 1.5 times the load (a single output 120W rated power amplifier with a 100W rated PROBASSCO speaker (40 private rooms in total), 4 years without a bass, treble (diameter 45 titanium film) ) 4 broken. Of course, if you do not "rework" the speaker unit, it will not be as efficient as that.

　　The voice coil of the speaker is in a suspended state, which means that there is basically no medium for conducting heat except for the slight contact between the centering support and the basin frame. Therefore, how to keep the voice coil in contact with the central magnetic column so as to maximize the volatilization of heat is the key to making the speaker operate stably in a full compliance state.

　　At present, there is a method of adding ferrofluid to the high-pitched magnetic seam to establish the contact between the voice coil and the central magnetic column, but in the professional field, in order to maintain high sensitivity, this is often not done. The woofer (moving coil) currently does not have any means to establish a medium between the voice coil and the magnetic column. So at this time we need to change our attitude to solve the problem. That is to be easy with the situation, not to be bound by the box of theory.

Read recommendations:

MB210 Low Profile Bar audio set Merchant

F81 Bar speaker company

EVO 6E KTV audio Merchant

Horn speaker frequency divider

The noise problem of professional audio system