Several reasons why KTV speakers are burnt out

　　1. Unreasonable configuration of KTV audio equipment: For example, the configuration of audio and power amplifier is unreasonable. When such equipment is used, it is very likely that the equipment will be burned out. The configuration we are talking about here means that our audio equipment must be reasonably configured in terms of power. Improper power configuration is one of the important reasons for audio burnout.

　　Second, improper use of the frequency divider in KTV audio equipment may also cause the audio to be burned out. Under normal circumstances, improper use of the crossover point of our input, or unreasonable working frequency range of the loudspeaker is also a cause of damage to the tweeter. From this we can see that if we want to protect our audio, we must strictly follow the working frequency range of the speaker provided by the manufacturer when we buy it to select the correct crossover point.

　　3. Improper adjustment of the equalizer. The adjustment of the equalizer is very important and should be adjusted with an actual spectrum analyzer or other instruments. Only in this way can we reduce the burnout of our equipment to a certain extent.

　　Unreasonable adjustment of the volume once or twice may affect our equipment and we did not notice it, but if we operate improperly for a long time, sooner or later, our KTV audio equipment will burn out.

Read recommendations:

F121Car stereo wholesaler

PSM 12 POINT SOURCE MONITOR Speaker bar company

Resolution 1.5TT Marten Audio company

When buying a stage audio amplifier, pay attention to these points so as not to suffer a loss.High-e

Some common conference audio system interference?