About the role of speaker crossover

　　About the role of professional speaker crossover

　　The speaker frequency divider can separate the frequency of the sound signal, distinguish the sound signals of different frequency bands, and then amplify and send it to the speakers of the corresponding high and low frequency bands. The effect of achieving different high and low sound quality is the speaker frequency divider.

　　About the role of professional speaker crossover

　　Principle of speaker crossover:

　　From the perspective of working principle, the frequency divider is a filter network composed of capacitors and inductors. The treble channel only allows high-frequency signals to pass through and blocks low-frequency signals; the bass channel is the opposite, only allowing low-frequency signals to pass through but blocking high-frequency signals; the midrange channel is a band-pass filter, except for the two crossover points, one low and one high. The frequencies between the two can pass through, and both high-frequency and low-frequency components will be blocked.

　　It seems simple, but in the frequency divider used in practice, in order to balance the flexibility difference between the upper and lower sound units, manufacturers need to participate in different sizes of attenuation resistors or impedance compensation networks composed of resistors and capacitors according to different conditions. , Different designs and production processes naturally make the seemingly inconspicuous component of the frequency divider have different effects in the speakers. These details are what all HIFI equipment must pursue, which is also the fundamental difference between HIFI and ordinary civilian equipment.

　　The role of speaker crossover:

　　When playing music, due to the limitations of the speaker unit's own capabilities and structure, it is difficult to cover all frequency bands with only one speaker. If the full-band signal is directly sent to the high, medium, and woofer units without distribution, the frequency response of the unit The local "excess signal" outside the range will adversely affect the signal recovery in the normal frequency band, and may even damage the tweeter and midrange unit. For this reason, designers must divide the audio frequency band into several segments, and use different speakers for different frequency bands to stop the sound. This is the origin and function of the frequency divider.

　　The crossover is the "brain" in professional speakers, and it is very important to the sound quality. The music signal output by the power amplifier must be processed by each filter element in the fire frequency device, so that the signal of the specific frequency of each unit can pass through. It is necessary to design the speaker's frequency divider scientifically, reasonably and rigorously to effectively modify the different characteristics of the speaker unit, optimize the combination, make each unit maximize its strengths and avoid weaknesses, fully display its own potential, and change the frequency response of each frequency band. It has to be smooth and accurate in the phase of the sound and image, so that the high, medium, and low-pitched music can be played with clear, in-time, clear, warm, broad, and natural sound quality. Regarding the role of speaker crossover.

　　In practical frequency dividers, sometimes in order to balance the flexibility difference between the high and bass units, attenuation resistance is also added; in addition, some frequency dividers also participate in an impedance compensation network composed of resistors and capacitors. It is to make the impedance curve of the speaker psychologically smoother, so as to facilitate the power amplifier drive.

　　In real life, there are many small characters with great energy. In many electronic products, it is very likely that a small piece of equipment will damage the use of the entire electrical appliance. The speaker crossover is a typical representative of this role. A speaker is far from being able to release high and low sound quality. Only through the speaker crossover that cannot be seen from the outside, the sound signal is divided into the speaker. There is beautiful high-quality sound reproduction.

Read recommendations:

C10 Sound bar manufacturer

XD18I Bar speakers wholesale

F121Car stereo wholesaler

What kind of speaker is used in the party bar --- Mateng Audio

Baoan IOS CLUB special audio equipment is provided by Mateng Audio