source:Industry News release time:2022-11-11 Hits: Popular:Brand bar audio wholesale
The power sequencer can start the power supply one by one from the front equipment to the rear equipment. When the power supply is turned off, all kinds of electrical equipment will be turned off from the rear to the front, which can effectively manage and control all kinds of electrical equipment, avoid human error operation, reduce the impact of electrical equipment on the power supply grid at the moment of switching, and avoid the impact of induced current on equipment, The stability of the whole power system is ensured.
Function of power sequencer
The power sequencer is often used in the electronic peripheral equipment of professional audio system. As an audio technology practitioner, it is necessary to have GET skills on how to select the power sequencer. Before we say how to select a power sequencer, we should first understand the role of the power sequencer. The power sequencer can start the power supply one by one from the previous equipment to the next equipment. When the power supply is turned off, all kinds of electrical equipment will be turned off from the next level to the previous level, so that all kinds of electrical equipment can be effectively managed and controlled in a unified manner, avoiding human error operation, At the same time, it can reduce the impact of electric equipment on the power supply grid at the moment of switching, and also avoid the impact of induced current on the equipment, ensuring the stability of the entire power system.
First, voltage stability
The voltage stability is the first. I think everyone has no opinion. The stable operation of the sequencer is the premise of the reliable system. The sequencer is often not turned on, or one or two channels are not turned on from time to time, so that no good system can be built without such a sequencer; In addition to its reliable operation, it also needs to have a certain anti-interference ability. Part of the interference source of timing impact comes from the external power supply network, which mainly includes the surge and pulse spike generated by induction lightning, motors, fluorescent lamps, etc; The other part is the interference caused by the internal power supply charging or switching power supply when the system starts.
After talking about the interference source, let's talk about the steps to test the stability of the sequencer:
1. Power on the sequencer, set the timing interval of the sequencer to 1 second, and then start the sequential starting function. During the starting process, switch the fluorescent lamps or electric drills in the room. Note that the sequencer cannot be restarted or the channel cannot be opened. This method should be tested for many times.
If possible, use a pulse generator to inject interference pulses into the sequencer to supply mains power (220V power). During the test, increase the interference intensity by several times to test the anti-interference intensity of the sequencer under test. Generally speaking, it should be above 1KV (1000V).
2. Each output of the sequencer is connected with a load (preferably a high-power power amplifier). If there is not so much load, the load can be connected to the next several consecutive circuits (such as CH8, 7, 6, 5). Then power on the sequencer and start the sequential starting function (note that for equipment with adjustable timing interval, the interval should be adjusted to 1 second). The starting process depends on whether the sequencer can be restarted or the channel cannot be opened.
Second, scalable
The number of output channels of the power sequencer is divided into 4, 8, 10, 12, etc. When the number of devices exceeds the number of channels of a sequencer, it is necessary to expand (cascade) the use. When selecting, it should be noted that after expansion, the first channel can be opened to the last channel, and the last channel can be closed to the first channel; Many sequencers on the market can not meet this requirement, and all of them are closed at the same time.
Third, function
Select according to project requirements, such as level starting function, RS232, RS485, TCP/IP control function, and status monitoring; Timing interval and normally open configuration function; Power purification, anti surge, voltage and current monitoring and protection functions.
Popular recommendation
Dance Stack Overview Car stereo Factory
2021-07-16Resolution 2 SHCar stereo Vendor
2021-07-17F221 Marten Audio Merchant
2021-07-14F215 MK2 ktv bar sound Factory
2021-07-14Resolution 18 Bar speaker Vendor
2021-07-17Bass Reflex Range Bar hall sound Vendor
2021-07-14XD10 KTV audio manufacturer
2021-07-26F10 Nightclub sound Vendor
2021-07-26RM15 Audio for bars Vendor
2021-07-15Resolution 4S Skeletal Bar use audio Vendor
2021-07-16EVO 7THBar sound company
2021-07-17PSM18 POINT SOURCE MONITOR Speaker bar Factory
2021-07-16How does an audio processor render good results?
2022-06-28Chongqing DNA & Finland AURA-the untouchable peak of electronic music
2021-12-06Tips for professional audio placement
2021-10-18How to configure audio equipment
2022-12-28How to choose professional stage audio?Anhui Bar Audio Factory
2022-09-06History of Chinese Family Audio Development
2023-05-06Bar professional audio system FUNKTION ONE Mateng Audio
2022-12-02Common sense of stadium sound reinforcement system
2022-05-28ID-X Audio of Hohhot Electronic Bar in Inner Mongolia is provided by Ma Teng Audio.Anshun Bar Audio
2022-03-21Chongqing WUDU Unbounded Space Audio recommends Maarten Audio
2022-09-27Detailed explanation of commonly used cables for audio equipment There is a mystery in connecting pl
2022-04-19What is the difference between car audio and home audio
2022-04-26