source:Industry News release time:2022-07-09 Hits: Popular:Brand bar audio wholesale

Reasons for no signal from wireless microphones in general KTV audio equipment:
1. The signal reception conditions in the KTV box are not good
If there are pillars blocking the venue, and the sound control room is far away from the venue, there is a wall blocking or turning around, etc., it will affect the normal reception of the signal.
2. There are interference sources in the KTV venue that affect signal reception
Today's communication tools are developed and of various varieties, such as mobile phones, walkie-talkies, wireless phones, etc., which all interfere with each other, and the reflection of metal equipment and glass in the field will also cause this situation.
The solution to the no signal of KTV wireless microphone:
1. You can change the direction and angle of the antenna to improve your receiving conditions.
2. If the reception conditions are more severe, such as the sound control room is not in the venue, or there are pillars, walls, etc., the problem can generally be solved by extending the antenna. The emergency method is as follows: take a video cable, about 10- 15 meters, remove the antenna of the original receiver (or buy an antenna by yourself) and connect it with the video cable, and then install the antenna in the place where you have tested and can receive the signal.
3. You can try a different set of frequencies, because some interference sources may just conflict with the frequency of this set of microphones, and changing a set of frequencies can often solve the problem. If the receiving environment such as a column is not very good, try to buy the one with single transmitter and double receiver (that is, one microphone and two antennas), because the receiving range of the two antennas is large. The two yellow lights of the machine are on, indicating that it is in all directions; if the yellow light on the left is on, it means that the left receiving antenna is within the speaking range on your left. The light turns on immediately, and the antenna on the right works immediately. This ensures that your speech is received in all directions.
4. If the receiving environment is too bad, you can choose a multi-frequency adjustable wireless microphone.
The above are the reasons and solutions for the lack of signal in the KTV wireless microphones organized by Jazz Dragon professional audio manufacturers.
Popular recommendation
F221 Marten Audio Merchant
2021-07-14A1 Car stereo manufacturer
2021-07-26AX 88KTV audio sales
2021-07-17I3 Small bar sound Vendor
2021-07-26Resolution 4T Touring Bar use sound Vendor
2021-07-16Resolution 5E Big sound bar Vendor
2021-07-16I8SUB Gymnasium audio Vendor
2021-07-26XQ48 Bar sound bar Merchant
2021-07-26XQ42 Bar speaker wholesaler
2021-07-26I5 Concert sound Merchant
2021-07-26XD12 Brand bar audio Vendor
2021-07-26Resolution 2 SHCar stereo Vendor
2021-07-17Analysis of the cause of the failure of the speaker unit
2022-09-27Classification of speakers.Bar private room audio Vendor
2021-11-15Inner Mongolia Hohhot Bar ID-X CLUB Audio is provided by Ma Teng Audio
2022-09-13Introduction to the principle of professional audio waterproofing
2021-09-06Bar Audio Equipment Mateng Audio
2022-12-06Several tricks for KTV audio debugging
2022-02-19Audio classification.Audio equipment for video conference room
2022-08-12How to avoid failure of each component in the stage audio supporting system
2022-05-09Key Points of On-site Control of Feedback Suppressor in Stage Sound System
2022-05-09What elements do professional audio equipment need?
2022-05-09What factors determine the quality of sound
2022-10-24Audio output device layout in conference room.School audio sales
2022-04-22