How to buy professional stage audio?matengaudio.com

　　First of all, we must adhere to the principle of practicality. Strictly speaking: Every abnormally formed product with excellent quality is a practical product, but a practical product does not mean that it is practical everywhere. It must be matched with certain other occasions. The equipment can be called practical, otherwise it can only be wasted and idle. For example: After the sound pressure and electro-acoustic power required in the plan are determined, the power of the power amplifier and speakers should also be based on this, referring to different uses. If you don't consider the calculation results, select according to the high-power model, which is not practical.

　　The second is to adhere to the principle of practicality. It is not very accurate to say which specific equipment is practical or not. It can only be said that the selection of a certain equipment is not suitable for a specific occasion. The practicality mainly depends on the use of the project and Features, as long as the selection is compared with the use of the project. All of them may cause unpractical results. What is not too unusual for practicality is that the selection is not very practical, and the equipment may be occasionally used; if the practicality is not good, the equipment is basically a waste. For example: for one The entertainment dance hall is equipped with an 8-track recorder specially designed for recording, which seems not very practical; it is not practical to set up a sub-500W forced light or 1000W starlight for large-scale performances for a small stage. The impractical mistakes not only require planners to have a comprehensive understanding of the characteristics of most equipment, but also need to fully explain the performance of the equipment to the user in the planning and selection of the project.

　　In addition, we must insist on the equivalence of equipment grade and performance. Specifically, among the series of audio and lighting equipment that are focused, they should basically be made in the same style, commensurate in price, and uniform in performance, or in other words. The product has some related equipment that has a good match with it, and these matching methods have been tested by many professionals, so it is not difficult to achieve a "good match". The planner must have a rich resume. Otherwise, the matching can only be selected based on feelings, so there will inevitably be inconsistencies.

Read recommendations:

D80/D100/D120 KTV brand audio Vendor

MB210 Low Profile Bar audio set Merchant

F221 Marten Audio Merchant

What should be paid attention to in the design of sound insulation of KTV sound engineering design s

Tell you the rules and requirements for the combination of audio equipment and equipment!