How to debug stage sound equipment

　　1. Before debugging, the technician must have a clear understanding of the structure of the stage sound system and the function of the equipment. We have fully grasped the condition of the stage audio equipment, and we have drawn up a feasible stage audio debugging plan based on the actual situation. Otherwise, if we do not understand the stage audio equipment blindly, the results may be very bad. Especially for some new and special equipment that are rarely used in stage sound engineering, it is necessary to carefully study its principles, functions and operating methods before the device is debugged.

　　2. Before debugging, it is necessary to conduct a comprehensive check of the system and equipment settings. After all, the focus of viewing process and system debugging is different between devices and stand-alone devices. The setting of equipment is often arbitrary. Before debugging, some important setting buttons may now be completely different from the actual requirements, so a comprehensive view is If necessary, it is best to make a good record of the setting status of each stage audio equipment.

　　3. Corresponding debugging methods should be adopted according to the characteristics of the system when debugging. Different stage audio system may have different requirements, so the commissioning plan should be drawn up according to the actual situation. If you blindly debug according to the general engineering commissioning methods, the results will not be good. For example: a sound system without a reaction suppressor, if you do not refer to the design results when debugging, only rely on long-term high-gain sound reinforcement to find the reaction point, it may cause damage to the professional stage speakers.

Read recommendations:

MST 10Sound bar sales

F121Car stereo wholesaler

Minibass 212 Bar bar sound Merchant

What is the difference between speakers and speakers?

Common speaker installation modes in line array speaker system engineering.Bar speaker Factory