Shenzhen Ma Teng Audio Technology Co., Ltd.

News

The perfect sound system with supreme attentive service has been recognized by a wide range of users

Home  -  News  -  Industry News

Talk about the cleaning of speakers and speakers

source:Industry News release time:2022-10-10 Hits:     Popular:Brand bar audio wholesale

  MB210 Low Profile Bar audio set Merchant

  1. Remove all accessories from your hands

  If you have the habit of wearing jewelry or watch accessories, please take off all of them in the first step, because they are likely to directly bump or scratch the box during the wiping process.

  2. Blow the entire speaker box with compressed air to gently remove the tiny dust that may enter the box. Don't underestimate these tiny particles, they scratch the paint more easily than you think. Other contaminants such as grit, powder or even soft petals can damage the cabinet. So blowing these things away before you start wiping helps avoid accidental damage to the case.

  3. Two microfiber cloths: one wetted with water and wrung out, the other kept dry. Soak one of the cleaning cloths in lukewarm water and wring it well, the other cleaning cloth does not need to be wet. Make sure the cleaning cloth you use is free of creases and thread stitches.

  4. Fold the fully wrung microfiber cloth, wipe the entire speaker box slowly and gently, remember not to wipe and touch the tweeter, this is very important, remember not to touch.

  5. Repeat the previous step with a dry microfiber cloth, still slowly and gently wiping each part of the cabinet.

  What should I do if I find some scratches on the surface of the speaker cabinet? Although polishing with polishing tools and car polishing supplies is common, such methods are not suitable for speakers.

  First of all, the paint surface of the speaker is very delicate and easily damaged. If you don't know the exact chemical composition of the polishing products, it is difficult to predict what kind of adverse effects it will have on the paint surface. In most cases, user polishing ends up damaging the finish. Therefore, in this case, it is recommended to contact the local dealer to inform the product details.

  Clean the tweeter

  After the speaker cabinet has been cleaned, how should the speaker's silk soft hemispheric tweeter be cleaned? The method is actually very simple: blow gently with an air blower.

  Before cleaning, the first thing to remind is: do not touch the silk soft dome tweeter. The silk soft-dome tweeter is incredibly fragile, and you may be tempted to vacuum or dust off the speakers when doing cleaning work, which is very dangerous and can be self-defeating and damage the speakers.

  So how do you clean a recessed soft dome tweeter? If the speaker is playing music, and if there is dust on the tweeter, you can ignore it.

  The fine dust on the soft dome tweeter has little effect on the sound quality. But if you really don't like the tweeter getting dusty, the best way is to blow it gently with an air blower. This should be by far the safest cleaning method.

  Clean the woofer

  Compared to the silk soft dome tweeter, the midrange and woofer are more solid. You can use a dry microfiber cloth for cleaning. If the woofer gets more stubborn stains, you can also clean it with a well-wrung, damp cloth, and then wipe it gently with a dry cloth, so that the cleaning can be successfully completed.

https://www.nxbtx.com/products/

  The cleaning of speakers is not a simple matter, it requires considerable care and patience, and choose the correct method to operate according to the different characteristics of various speaker units. In daily life, you also need to pay attention to protect the speakers from accidental damage


Read recommendations:

BR132A Bar speaker wholesale

Resolution 4E Bar speakers Factory

XD10 KTV audio manufacturer

Zunyi Electronic Bar FIRST ROOM Special Audio Equipment---Mateng Audio

What is the general audio used in the electric bar? Mateng Audio

Previous:Can home theater speakers also be used for karaoke? Back to list Next:Zunyi FIRST ROOM bar professional audio equipment is provided by Mateng Audio

Popular recommendation

F118 MK2 Brand bar audio sales

2021-07-14

D2 AMPS Bar speakers wholesaler

2021-07-26

I3 Small bar sound Vendor

2021-07-26

XQ48 Bar sound bar Merchant

2021-07-26

Evolution 7E Sound bar Merchant

2021-07-16

Resolution 4S Skeletal Bar use audio Vendor

2021-07-16

Infrabass 218Sound for bars Vendor

2021-07-14

BR132A Bar speaker wholesale

2021-07-14

F101 Marten Audio Vendor

2021-07-16

Resolution 1.5 ktv bar sound Vendor

2021-07-16

Resolution 4T Touring Bar use sound Vendor

2021-07-16

F1201 School audio Vendor

2021-07-16

Troubleshooting common problems during recording.Audio for bars Manufacturing

2022-04-18

What should be paid attention to in the design of sound insulation of KTV sound engineering design s

2022-02-24

Introduction to audio-the principle of better matching of audio amplifiers.Bar sound engineering Ven

2021-11-16

How to prevent sound system whistling.Home ktv audio Factory

2022-07-05

Common problems in professional sound engineering.Bar Audio Nanjing Vendor.Bar audio set Vendor

2021-11-17

How to configure a suitable power supply for stage audio.Bar use audio Vendor

2021-12-02

What aspects should be considered when configuring professional audio equipment.Shanghai conference

2022-06-20

Chengdu DNA Bar High-end Custom Audio---Mateng Audio

2022-03-07

Tips for professional audio placement

2021-10-18

Tongxiang Internet celebrity SPACE CLUB audio equipment is provided by Ma Teng Audio

2022-05-12

Sound field design instructions for entertainment audio

2022-02-19

Simple classification of microphones in conference room audio equipment

2022-05-05